Skip to content
If an item you want is sold out, please know we update inventory levels every MONDAY at or around 6PM CST.
If an item you want is sold out, please know we update inventory levels every MONDAY at or around 6PM CST.
Aviator Collection

Aviator Collection

A collection of aviation related packs, mounts, carbon fiber arms, holders and components curated for the discerning aviator to record their adventures.

Select the components needed to build out your own installation. If you have any questions or looking for inspiration, contact us

 

  • Cirrus SR22/SR22T Chimney

    Cirrus SR22/SR22T Chimney

    $ 210.00

    Overview The 67 Designs "Chimney" is a single nylon body designed to allow owners and operators to get as much very hot air to escape the engine co...

    View full details
  • Aviator Pack - Suction Cup, Nano Arm & MagMount G3 SuccessActive

    Aviator Pack - Suction Cup, Nano Arm & MagMount G3

    $ 119.00

    Product Details Carbon Fiber Series™ Suction Cup G2, Nano Arm and MagMount G3™ allows you you to install the suction cup mount on a flat, clean a...

    View full details
  • Aviator Pack - Suction Cup, Mini Carbon Fiber Arm & MagMount G3

    $ 124.00

    Product Details Carbon Fiber Series™ Suction Cup G2, Matte Carbon Fiber Mini Arm and MagMount G3™ allows you to install the suction cup mount on ...

    View full details
  • Aviator Collection 3/4” V-Brace MagMount G3™ Pack

    Aviator Pack - 3/4" V-Brace Packs

    $ 120.00

    Installation is Easy. No drilling.  Benefits The original and the only packs designed and manufactured in the U.S.A. Rotates 360 degrees on the ...

    View full details
  • Aviator Pack - Small Bar Clamp with MMG3 with 20mm Clamp

    Aviator Pack - Small Bar Clamp with MMG3 with 20mm Clamp

    $ 69.00

    Product Details Carbon Fiber Series™ Small Bar Clamp Mount  and MagMount G3™ allows you to connect to small bars and tubing in your aircraft.  Ma...

    View full details
  • MagMount G3 Device Holder

    MagMount G3 Device Holder

    $ 45.00

    The MagMount G3™ is offered for individual sale on this page and is available in the following packs: JL / Gladiator Rail™ Packs. JL / Gladiato...

    View full details
  • Holder for GoPro

    GoPro® Camera Mounts G2

    $ 35.00

    A Few Options and one Simple Solution 67 Designs' offers two different options of the GoPro® compatible mount. Please select carefully after rea...

    View full details
  • Matte Carbon Fiber Arm by 67 Designs

    Arm Builder for 20mm - 20mm Ball Sizes

    from $ 27.00

    Welcome to your Arm Builder™ Use this page to select available arms that have clamps for 20mm balls at each end of the arm. Arm length  Arm f...

    View full details
  • MagMount G3 Large and Small Black Steel Plates

    MagMount G3 Large and Small Black Steel Plates

    $ 15.00

    Benefits Allows a MagMount G3 customer to: Attach the large plate to a mini tablet for use at a desktop. Attach small plates outside or inside ...

    View full details
  • Universal for Phones G2 - Made in the U.S.A.

    Universal for Phones Device Holder G2

    $ 49.00

    Availability of the Universal for Phones G2 The Universal for Phones G2 is now being rolled out with the following packs: JL / Gladiator Rail™ Pa...

    View full details
  • 67 Designs Universal Tablet Holder
    Sold out

    Universal Tablet Holder

    $ 120.00

    Generation 2 ("G2") After an amazing period of selling the initial Universal Tablet Holder we have now sold out the G1 and we are slowly releasin...

    View full details
  • Camera Mount - G2
    Sale

    Camera Mount

    from $ 19.00

    Are you looking just to attach a GoPro® camera? If you are needing to connect to a GoPro™ with the 3-fin connection, check out the new GoPro® Cam...

    View full details
  • Small Bar Clamp Mount G2

    Small Bar Clamp Mount G2

    from $ 29.00

    Product Details Carbon Fiber Series™ Small Bar Clamp Mount G2 allows you to connect to small bars and tubing such as a headrest mount.  Maximum d...

    View full details
  • Mounting Clamps for 1" ~ 1.5" ~ 1.75" ~ 2" OD Tube

    Mounting Clamps for 3/4" ~ 7/8" ~ 1" ~ 1.5" ~ 1.75" ~ 2" OD Tube

    from $ 37.00

    Benefits Clamps for the most common OD size of tubes used on vehicles today. Rapid installation for bars or tubes with diameter 19.25mm. (3/4")...

    View full details
  • Suction Cup Base G2
    Sale

    Suction Cup Base

    from $ 19.00

    Product Details - G2 A totally new design of a lightweight pump-action suction cup for the Carbon Fiber Series™. Carbon Fiber Series™ - Suction Cu...

    View full details
  • (CF) Carbon Fiber Series - Cable Clip

    Cable Clip

    $ 19.00

    Installation is Easy. Press on the carbon fiber arm Press in the Apple cable  Benefits Keep your Apple or power cord neatly on the carbon f...

    View full details
  • Carbon Fiber Arms - 1" and 1" Clamps (Matte)

    Arm Builder for 1" - 1" Ball Sizes

    from $ 27.00

    Welcome to your new Arm Builder™ Use this page to select available arms that have clamps for 1" ball mounts at each end of the arm. Arm length ...

    View full details
  • Carbon Fiber Arms - 20mm and 1" Clamps (Matte)

    Arm Builder for 20mm - 1" Ball Sizes

    from $ 27.00

    Welcome to your new Arm Builder™ Use this page to select available arms that have a clamp for 20mm ball at one end and a clamp for 1" ball at the...

    View full details
  • The Dam Adapter by 67 Designs - G2
    Sale

    The Dam Adapter™ for 1" Balls

    from $ 9.00

    Installation is Easy. Undo the included fasteners and attach to a 67 Designs' carbon fiber arm (not included) and any existing hardware that has a...

    View full details
  • The Elbow for Connecting 2 Carbon Fiber Arms

    20mm-20mm Elbow Connector™ for Carbon Fiber Arms

    $ 19.00

    Go ahead - Get Creative with the Elbow.  Install each ball of the Elbow Connector™ into the metal connector on the end of the carbon fiber arm. ...

    View full details
  • Universal Carbon Fiber 2 Ball Base by 67 Designs

    Universal Carbon Fiber 2 Ball Base

    $ 49.00

    Benefits By far the most clean and attractive way to install a two ball base in any vehicle. Made with real matte finish carbon fiber. Expandable...

    View full details
  • Series 55 Rail System

    Series 55 Rail System

    from $ 12.00

    Check if it fits your vehicle! We have created a template that you can print and cut out to see if the base will fit in your vehicle. Click to ...

    View full details
  • Diamond Plate Alternative - 2 Holes

    Diamond Plate Alternative

    $ 29.00

    Installation is Easy.  Install in minutes.  Benefits Superior materials and made in the USA. Use as either a base to fix to a surface or on ...

    View full details
  • Amps Plate by 67 Designs

    AMPS Plate

    $ 29.00

    Installation is Easy.  Install to your device holder that has the non-square (rectangular) format AMPS fitting.  Benefits Superior materials...

    View full details
  • X-Plate
    Save 21%

    X-Plate

    Original price $ 19.00
    from $ 15.00

    Installation is Easy.  Install to your device holder that has a square and not AMPS fitting.  Benefits Superior finish and materials Use as ...

    View full details
  • Slotted Bottom Ball - 20MM by 67 Designs

    Slotted Bottom Ball - 20MM

    $ 15.00

    Product Details The Slotted Bottom Ball allows you to attach a metal 20mm ball using a standard 1/4" - 20 female thread. It's a great way to att...

    View full details