Your cart
(CF) Carbon Fiber Series - Jeep® JK Mount Magmount

JK Mount MagMount - Replacement Surface

$ 3.00

Installation is Easy.

  • Peel off the old super-grip elastomer
  • Place a fresh elastomer in the middle of the MagMount Face 

Benefits

  • Freshen up your MagMount face in just 15 seconds. 
  • Available in Single, 3 pack and 5 pack options.

Product Details

  • Keeps the device firmly against the MagMount.
  • Elastomer is delivered on a peel-way backing sheet.
  • Made in the USA
  • Strong 3M brand PSA backing to stick to the nylon MagMount surface.

Series Features

  • Full carbon fiber tubes for strength and beauty.
  • Metal bases and hardware for substantial support.
  • 5 different arms
    • Single -small, medium & large
    • Jointed - small & large
  • 9 different mounts
    • Car cupholder mount
    • Desk/wall mount
    • Large clamp mount
    • Small clamp mount
    • Camera mount
    • Square mount
    • VESA mount for TV and monitors
    • Round mount
    • Case/holder mount

The (CF) - Carbon Fiber Series brings a component based approach to supporting and working with your devices. The core of the (CF) - Carbon Fiber Series range are the carbon fiber fixed or jointed arms that users then attach to bases and mounts. These are real carbon fiber tube components along with metal and heavy duty plastic hardware. The products are very substantial and so they weigh more than you think. In fact, you want that very down low mass to be able to use physics to keep the device firmly held in place as you tap, poke, stroke and otherwise interact with the glass of the device. The mounts allow you to connect camera's, GoPro and Go-Pro-like action cameras. They allow you to connect VESA standardized products like monitors and computers. You can connect the bases directly to walls, desks, tables or anything you wish, or you can add a base so you can move your configuration about the desk, counter-top.

Important Notice: This magmount contains a permanent magnet. It is highly recommended you do not use this magmount with a 3rd party device case that incorporates a place to store credit cards or other cards sensitive to magnets. Apple and other devices almost always contain sensors that can be sensitive to magnets. An example is the magnetic compass sensor. This 67 Designs magmount has been tested in real-world conditions for many months with Apple iPhone 6 and 6 Plus products in official Apple cases with the stainless steel plate attached to the back of the case. No interference with the operation or use of the devices was observed. The Maps navigation app on the phone worked just as well with this magmount as when the device was attached to the vehicle without a magmount. If you have any concerns about any potential damage to your device DO NOT order this product. If you have previously purchased this product and you observe any issues of any kind, immediately stop using this product and report - with details - the situation to 67 Designs Customer Service.