Your cart
Little Ball for 1" Tubing
Little Ball for 1" Tubing
Little Ball for 1" Tubing
Little Ball for 1" Tubing

Little Ball for 1" Tube

$ 19.00

Benefits

  • Specifically shaped base for all 1" tubing so the fitting will not rotate.
  • Low profile
  • Great alternative to a our clamp products
  • Includes the 6mm threaded socket fastener. 

Product Details - Little Ball for 1" Tube

  • Made from metal for strength and finished in a semi-gloss black finish.
  • Pack contains:
    • 1 x Little Ball for 25.4mm (1") tube
    • 1 x 6mm socket fastener that leaves 11mm of thread exposed below the Little Ball
    • Important: this pack does NOT contain arms or device holders. Be sure to add desired items to your order. Shown in images for example only.

Installation Options

  • Option A - If the tube wall is <2mm thick:
    • Drill through the top and bottom of the tube using a 6.5mm (or equivalent) drill bit.
    • Place the Little Ball and insert a 30mm long 6mm threaded socket (not included) through the fastener and the tube. 
    • Use and nut and washer to secure the Little Ball in place.
  • Option B - With a 2mm+ wall thickness
    • Drill through the top only of the tube using a 5mm (or equivalent) drill bit.
    • Tap the hole with a 6mm thread. 
    • Place the Little Ball and insert the included 6mm threaded socket fastener and screw into the new 6mm thread in the top wall.
    • Ideally, use Loctite Red 277 thread-locker, if available.
  • Related Instructions: