Your cart
T-Track 20mm Base

T-Track 20mm Base

$ 15.00

Installation is Easy. 

  • Install in a standard 25mm T-Slotted profiles. Use locking plate and fastener. 
  • Slide into desired location and tighten the fastener.
  • Can be removed when not needed.
  • Fits Goose Gear frames and tracks.

Benefits

  • Superior finish and materials
  • Rapid installation in minutes.
  • Fits the new JL E-Dock by Vector Offroad
  • Pack contains:
    • 1 x BT20 20mm diameter ball base.
    • 1 x 6mm socket fastener.
    • 1 x locking plate nut OR roll-in nut (select option above)
    • Important: if intending to use with non-metric T-slotted profile, know that the slot in your track slot must be at least 6.5mm (0.26") wide 
    • Important: this pack does NOT contain arms or device holders. Be sure to add desired items to your order. Shown in images for example only.