Series 55 Track Ball
Installation is Easy.
- Install in a 67 Designs Series 55 track profile.
- Use locking plate and fastener.
- Slide into desired location and tighten the fastener.
- Can be removed when not needed.
- Superior finish and materials
- Rapid installation in minutes.
- Pack contains:
- 1 x BT55 20mm diameter ball base.
- 1 x 5mm socket fastener.
- 1 x locking plate nut
- if intending to use with non-metric T-slotted profile, know that the slot in your track slot must be at least 6.5mm (0.26") wide.
- This Series 55 track ball will fit in the Series 55 rail.
- A BT20 track ball designed for the Series 20 rail will NOT fit the Series 55 rail profile.
- Do not intermix different Series rails and with different series trackballs.
- This pack does NOT contain arms or device holders. Be sure to add desired items to your order. Shown in images for example only.