Series 20 Track Ball
Installation is Easy.
- Install in a standard 25mm T-Slotted profiles. Use locking plate and fastener.
- Slide into desired location and tighten the fastener.
- Can be removed when not needed.
- Designed so any pressure on an attached arm will not rotate the holder.
- Superior finish and all metal construction.
- Compatible with and inserts into RAM® Tough-Track™ -including the for 18-19' Jeep JL/Gladiator (Part# RAM-DT-204-TRACK-A12U).
- Pack contains:
- 1 x BT20 20mm diameter ball base.
- 1 x 6mm socket fastener.
- 1 x locking plate nut sized for the Series 20 track
- Item Number: A24043
- if intending to use with non-metric T-slotted profile, know that the slot in your track slot must be at least 6.5mm (0.26") wide.
- This Series BT20 will not fit the 67 Designs' Series 55 track profile.
- This pack does NOT contain arms or device holders. Be sure to add desired items to your order. Shown in images for example only.