on all orders over $90
on all orders over $90
67 Designs offers two different track-based solutions to discretely mount devices around a van, trailer or camper.
The Series 55 is a very discrete track platform that comes in various lengths and can be attached around the vehicle.
If your van already has the larger scale L-Track often seen in Adventure Wagon, RoamBuilt and Sportwagon, then we have an excellent all metal single ball base.
Not seeing a product or configuration you want or need, ask Customer Service. Remember to look for the holders and arms for your desired configuration around the van.
Installation. Allow 5-10 minutes to install. Some drilling required. Fastener hardware included. Mounts at 6 points for a sturdy installation....View full details
Installation is Easy. Spin the knob to release the base a little and then insert-n-slide to lock in the base. Tighten the thumb knob to lock th...View full details
Check if it fits your vehicle! We have created a template that you can print and cut out to see if the base will fit in your vehicle. Click to ...View full details
Installation is Easy. Install in a 67 Designs Series 55 track profile. Use locking plate and fastener. Slide into desired location and tighten...View full details
Availability of the Universal for Phones G2 The Universal for Phones G2 is now being rolled out with the following packs: JL / Gladiator Rail™ P...View full details
A Limited Weekly Batch Size Color - Candy Apple Red Due to the strong interest from prospective customers wanting the Candy Apple Red edition hol...View full details
The MagMount G3™ is offered for individual sale on this page and is available in the following packs: JL / Gladiator Rail™ Packs. JL / Gladiator...View full details
Overview. This holder opens wide enough to accommodate the following iPad tablets (or Android equivalent). iPad Mini (1st through 6th Generation) ...View full details
A Few Options and one Simple Solution 67 Designs' offers two different options of the GoPro® compatible mount. Please select carefully after rea...View full details
Welcome to your Arm Builder™ Use this page to select available arms that have clamps for 20mm balls at each end of the arm. Arm length Arm finis...View full details
Go ahead - Get Creative with the Elbow. Install each ball of the Elbow Connector™ into the metal connector on the end of the carbon fiber arm. ...View full details
Product Details Carbon Fiber Series™ Small Bar Clamp Mount G2 allows you to connect to small bars and tubing such as a headrest mount. Maximum d...View full details
Benefits Clamps for the most common OD size of tubes used on vehicles today. Rapid installation for bars or tubes with diameter 19.25mm. (3/4")...View full details
Benefits By far the most clean and attractive way to install a two ball base in any vehicle. Made with real matte finish carbon fiber. Expandable...View full details
Installation is Easy. Install in minutes. Benefits Superior materials and made in the USA. Use as either a base to fix to a surface or on ...View full details
Installation is Easy. Install to your device holder that has the non-square (rectangular) format AMPS fitting. Benefits Superior materials...View full details
Installation is Easy. Install to your device holder that has a square and not AMPS fitting. Benefits Superior finish and materials Use as ...View full details
Installation is Easy. Press on the carbon fiber arm Press in the Apple cable Benefits Keep your Apple or power cord neatly on the carbon fibe...View full details
Benefits The Suction Cup G2 is super simple, lightweight and has a small diameter soft rubber base. The pump allows the user to see the vacuum a...View full details
Product Details The Slotted Bottom Ball allows you to attach a metal 20mm ball using a standard 1/4" - 20 female thread. It's a great way to att...View full details
A Limited Weekly Batch Size Color - Electric Blue Introducing our Electric Blue Universals for Phones G2. So many Jeep 4Xe customers asked for t...View full details
Overview 67 Designs offers this lightweight carbon fiber holder to attach your iPad housed in a Pivot Case. This carbon fiber adapter attaches...View full details
Installation is Easy. Remove the bolt of the Panavise Suction Cup. Remove whatever component is installed currently. Install the 67 Designs' a...View full details
This holder opens wide enough to accommodate the following iPad tablets (or Android equivalent). iPad Mini (1st through 6th Generation) iPad (1st ...View full details