Have a question for Customer Service? To email us your question click here. Alternatively use the button on the lower right of your screen.

Final few hours of the 2024 Black Friday-Cyber Monday Promotion.

Arm Clamps for 67 Designs Arms

SKU: ARM CLAMP PACK - 1 x 20mm [A44044]
$ 12.00
Ball Size Packs

Installation is Easy.

  • Undo the included fasteners and attach to a 67 Designs' carbon fiber arm (not included) and any existing hardware that has a 1 inch ball.

  • Installs in seconds. 

Benefits

  • Mix and match holders and devices. Reuse prior investment in other vendor's bases and device holders that may have a 20mm or 25.4mm (1") diameter ball.

  • Add an clamp set to the end of a 67 Designs' arm "core" and you can then attach a complete arm to a holder or base from another manufacturer.

  • Cast metal for years of service.

Available Packs

The options to connect a 67 Designs carbon fiber series "core" to 20mm and 25.4mm (1") ball hardware are as follows:

  • 1 x 20mm clamp.
  • 2 x 20mm clamp sets.
  • 1 x 20mm arm clamp and 1 x 25.4mm (1") arm clamp.
  • 1 x 25.4mm (1") clamp sets.
  • 2 x 25.4mm (1") clamp sets.

Note: An arm clamp includes 2 x aluminum castings + 1 x nylon thumb nut + 1 x 6mm black stainless steel bolt. An arm requires two arm clamps.

CAUTION: Not designed to work with any other manufacturer arms. Only works with 67 Designs "cores". Using with non-67 Designs arms voids the warranty.


Important Generation 1 "G1" and Generation 2 "G2" information.

  • The Dam Adapter™ G2 castings ("non-ribbed")will fit the Carbon Fiber Arms G1 segments.

  • The Dam Adapter™ G1 castings ("ribbed") will NOT fit all Carbon Fiber Arms G2 segments.

  • If you purchased a 67 Designs pre-configured Pack or individual Carbon Fiber Arms after March 13th, 2021 almost certainly you will have been shipped the Carbon Fiber Arms G2.

  • If you have any doubts about which version to purchase, please contact Customer Service before ordering.

  • If you are looking to order the G1 'ribbed' version of the Dam Adapter, please contact Customer Service.


      • Bases, carbon fiber arms, holders and devices shown in the images on this page are for reference only and must be purchased separately.

      Payment & Security

      Payment methods

      • American Express
      • Apple Pay
      • Discover
      • Mastercard
      • Shop Pay
      • Visa

      Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

      67 Designs

      Arm Clamps for 67 Designs Arms

      From $ 12.00

      Installation is Easy.

      Benefits

      Available Packs

      The options to connect a 67 Designs carbon fiber series "core" to 20mm and 25.4mm (1") ball hardware are as follows:

      Note: An arm clamp includes 2 x aluminum castings + 1 x nylon thumb nut + 1 x 6mm black stainless steel bolt. An arm requires two arm clamps.

      CAUTION: Not designed to work with any other manufacturer arms. Only works with 67 Designs "cores". Using with non-67 Designs arms voids the warranty.


      Important Generation 1 "G1" and Generation 2 "G2" information.



      Ball Size Packs

      • 1 x 20mm arm clamp
      • 2 x 20mm arm clamp set
      • 1 x 20mm arm clamp and 1 x 25.4mm (1") arm clamp
      • 1 x 25.4mm (1") arm clamp
      • 2 x 25.4mm (1") arm clamp set
      View product